No. 16

No. 16

50.5" x 40"

This one is another quilt addressing the issue of privacy. Literally, this quilt is about windows, specifically, the extensive use of floor to ceiling glass windows in many new modern houses. If you can see out, then others can see in. I love the idea of being able to see out, and bringing nature into a building (which was the original intent of this style of architecture). But I also really value my privacy. This would not be an ideal house for me. Also, because guns, when I see a house like this, all I can think of is, where do you hide from the bullets? I will leave you to imagine the metaphorical meaning of this work, because it is not obvious. (HINT: Think of the word 'windows' and privacy, and you'll be there!). 

I have been dreaming of this one for a long time, like YEARS, but I couldn't see the whole picture. I wanted fish swimming in a house of floor to ceiling glass windows. Then about 9 months ago, I found a commercially printed paper with koi fish. I KNEW that these would be the fish for the quilt. Except that, they were paper, and I wasn't sure how this was going to work??

I got the courage to go ahead and try moving forward on the project by trying to sketch the house. None of my efforts were working. I drove around Austin looking for the perfect 'model' house to sketch. I did not find it, though I suspect it is out there somewhere. Then I decided to look online for some ideas. I found these 3. 

None were perfect, or had the right angles, so I just jumped in and tried making a perspective drawing of a house in my sketchbook. I have never done a perspective drawing before, though I had seen one on social media. I was surprised how easily it all came together. Then I had to upscale the drawings for each room to make a pattern. 

Here is the sketch of the kitchen:

After sketching, I had to decide how to cut this apart and make it into a pattern, and which pieces would be sewn together first? I wanted to minimize the Y seams because those are more challenging. I used colored pencils to outline the shapes that would be sewn together as a group. Then I cut the sketch apart...labeled the pieces, and selected the fabrics for each piece.

This part feels a little daunting. However, a friend reminded me that I have done projects with more pieces, and that helped!

The next step is to trace each piece onto the back of the fabric and then cut them out with a seam allowance. And, it is a little challenging because some of the pieces are small and hard to hold still while tracing around them onto the fabric. One by one, they are stitched together. It would probably have been easier to paper piece this and definitely more accurate, but I find this method to be mentally easier.

After getting the house pieced, and the background, it was time to consider the fish. So, I cut them out and freed them from their backgrounds.

I wasn't sure how many I would need, so I just keep cutting and placing them on the design wall. Ultimately, I decided that this was too many fish!

You can see from this photo that the fish are swimming in FRONT of the house. However, I wanted them placed IN the house, which means they would need to be swimming behind some of the house walls. So, I cut open the seam allowances in the house, where the fish would be, and inserted them in through the new slots. Then I hand stitched the seams to match the size needed for the fish opening. I also needed the fish to stay in place before I got to the quilting part, so I used Mistyfuse on the back side of the fish. Did you know it works great on paper too? Cool! Note: This was a sequence error. It is easier to put Mistyfuse on the fish before cutting them out than afterwards, so trimming the Mistyfuse to the fish body was a bit tedious.

If you look closely, you can see the fish behind the just barely transparent fabric of the door!

Then I started the machine quilting. I was very concerned that the needle holes from the quilting would rip the paper the fish were on. Fortunately it was such a heavy weight of paper that I had no problems! Whew! I did have a very clear vision of how I wanted the quilting lines to look, and it required a lot of stops and starts, which in turn meant a lot of thread tucking.

The other minor parts of the project included some hand applique for the lights in the kitchen, and a bit of satin stitch to define some of the shapes better. This put me on hold for a couple of weeks because I thought I needed some shiny black thread. I did get the thread, but the delivery was SO slow, and my patience for finishing the project was wearing thin. And then the new thread did not perform well in my sample testing, and I ended up using something I already had (which I can not remember now what it was...). That is the way it goes sometimes!

The last little part was the scariest! The fish took a bit of a beating with all the machine quilting from pushing the quilt through the machine so much. I decided to 'fortify' them with a couple of coats of high gloss medium, applied by hand with a small paint brush. I thought about doing it first, but the fish were ironed in place with the Mistyfuse, and I didn't want to try to iron a fish that had medium on the surface. So maybe it all worked out okay? 

I am overall very happy with the way this turned out! It is so satisfying to see an idea become actualized! I entered this quilt into Quilts=Art=Quilts, but it did not get accepted. As happy as it would have been to have my little quilt go out into the world, I am comforted when they get rejected because then I get to look at them a bit longer, and I don't have a lot of shipping expenses. Possibly a warped perspective here, but I am okay with that. I hope you like this one! Thanks for stopping by!